PLUS-50™ II LIMITED TIME OFFER
Upgrade to Plus-50™ II and get more than just extended 500-hour* drain intervals.
Limited time offer. See your local dealer today!
BUY 20L of Plus 50™ II
GET FREE 1x Genuine Engine Oil Filter
BUY 205L of Plus 50™ II
GET FREE 1x 20L of Plus 50 II or Hy-Gard™ or Hydrau™ or Cool-Gard™ II and 1x Genuine Engine Oil Filter
BUY 1,000L of Plus 50™ II
GET FREE 4x 20L of Plus 50 II or Hy-Gard or Hydrau or Cool-Gard II and 4x Genuine Engine Oil Filters
Unlock Efficiency With 500-Hour* Drain Intervals
A 500-hour* drain interval that's twice the industry norm sets John Deere Plus-50™ II apart from conventional oils, leaving them in the dust! Made with cutting-edge John Deere technology and specifically formulated for use in John Deere machinery, fewer oil changes means a boost to your bottom line.
Check how much switching to Plus-50™ II can save you with our Oil Cost Calculator.
Go to the Calculator
Real Stories, real results
Discover how John Deere lubricants help save our customers time and money.
Stacking up where it matters
After 250,000 hours, the value for money in John Deere lubricants is a 'no brainer' for Victorian farmer and contractor, Richard Stecher.
Providing peace of mind
Evan Paxton and his family at Riverview Farms have exclusively used John Deere lubricants for 10 years, and the benefits 'speak for themselves'.
Find the right lubricant tough enough for your equipment.
Our engineers designed and tested our products to work hand-in-hand with your equipment, keeping them running for longer in the harshest conditions. Find the right lubricant with our lubricant selector or view our range of aftermarket products designed for your John Deere equipment.
Lubricant selector
View our range of lubricants
Lubricants specifications and testing data
Hear from the technicians who know best
John Deere's range of lubricants are relentlessly designed, engineered and tested to keep your equipment working as hard as you do.
A critical part of your machine's ecosystem
Providing more value over the life of your equipment
Sustainability in every sense of the word
WE'RE JUST DOWN THE ROAD.
Whether you're looking for a new piece of equipment or specialist advice, you'll always receive a warm welcome at your local John Deere dealership. There you'll be met by a friendly team who'll remove any stress or worry and help find the right solution for your needs. So, drop in and say hi.
with Genuine John Deere lubricants.
Discover what makes our hydraulic oil, engine oil, coolants, gear lubricants and grease engineered for performance and built to last in the toughest conditions.
Also learn about the differences between standard and extended drain intervals in engine oils, and which best suits you and your equipment.
†Conditions Apply. Gift with purchase Offer available from 14/04/2025 to 13/07/2025. Offer is not redeemable for cash. Offer must be redeemed at time of purchase. Speak to your dealer for more details about this Offer or read the full terms and conditions here.
*500 or 750 hour drain interval applies to John Deere diesel engines when the following criteria are met: 1. Engine is equipped with an extended drain interval oil pan. 2. Machine operates with Plus-50™ Il engine oil API CK-4.3. Machine uses a John Deere engine oil filter 4. Machine uses only ultra low sulphur diesel fuel.
Topics
- Oil
- Grease, Grease Guns, and Accessories
- Coolants
- Fuel Solutions
Oil
Plus-50™ II Engine Oil
- Designed and tested by John Deere engineers.
- Recommended by engineers who design, develop, and test John Deere engines.
- Formulated to perform up to 500 hours in your John Deere engine*.
- Reduces downtime.
- Next generation low ash CK-4 formula.
- Meets performance and emission requirements for all four-stroke diesel engines.
- Supports engines with diesel particulate filters, including 2007 and newer on-highway vehicles.
- Backward compatible for all current applications.
- So good it's guaranteed (view oil warranty).
- Increased drain intervals when used with John Deere fluids.
See brochure about Plus 50 II Oil
See warranty brochure about Plus 50 II Oil
*See dealer for details
Torq-Gard™
- Recommended for all diesel, gasoline, and natural gas (SAE 30 only) engines.
- Reduces corrosion
- Controls sludge for a cleaner engine.
Break-In Plus Oil
- Designed for new, rebuilt, or remanufactured engines.
- Encourages rings and liners to set correctly to ensure a good wear pattern and longer life.
Turf-Gard™ Engine Oil
- Recommended for ride-on mowers, walk-behind mowers, edgers, generators and other outdoor equipment with four-cycle petrol engines.
- Protects all-year long, providing rapid circulation in both hot and cold weather.
- Keeps engines clean while protecting against wear.
Hy-Gard™ Hydraulic/Transmission Oil
- Recommended for equipment with common system reservoirs or separate transmissions, wet clutches, brakes, and hydraulic systems.
- Saves you money by prolonging your systems.
- Works well in all temperatures.
Hydrau™ Hydraulic Oil
- Approved for use in hydraulic and hydrostatic systems of construction and forestry equipment.
- All-season capability in ambient temperatures of -25°C (-13°F) to 50°C (122°F).
- Factory fill fluid.
- Exceptional anti-wear performance over the life of the fluid.
- Protects against rust and corrosion.
ISO 68 Hydraulic Oil
- Provides sustained performance in high demand hydraulic systems where exceptional shear stability and wear protection is required.
- Suitable for sugar can harvesters, construction, forestry, mining and industrial equipment and farming implements.
Grease, Grease Guns, and Accessories
Multi-Purpose SD Polyurea Grease
- John Deere's best multi-purpose grease.
- Top-notch protection against high temperatures and extreme pressure.
- Ideal for wheel bearings, U-joints, and other grease points that need heavy-duty protection.
Multi-Purpose Extreme Duty Synthetic Grease
- Synthetic with Teflon™; no silicone
- Food-grade, non-toxic, and odourless
- Repels dirt, dust, and grime
- Prevents rust and corrosion
Multi-Purpose HD Lithium Complex
- High-quality protection for wheel bearings, U-joints, and other grease points where lithium grease is recommended.
Multi-Purpose Lithium Grease
- High-quality all-season grease for light- to medium-duty applications.
Heavy-Duty Water-Resistant Grease
- Exceptional performance in extremely wet operating conditions.
- Superior rust and corrosion protection properties.
Heavy-Duty Moly Grease
- Protects against extreme pressure.
- Contains 3% Moly to smooth rough spots when under sliding pressure.
John Deere green grease guns — Pistol-grip gun
- 5,000 PSI (34,474 kPa) without deformation
- Part #TY26517
John Deere green grease guns — Lever action gun
- Pressures up to 10,000 PSI (68,948 kPa)
- Part # TY26518
Coolants
Cool-Gard™ II Concentrate
- Service life of 6 years / 6,000 hours
- Fully formulated for heavy-duty cooling systems
- Reduces downtime and lowers operating costs
- Protects against corrosion and cavitation
- Thermally stable
- Mix on-site
- Contains bittering agent
- Recommended for heavy- and light-duty diesel, natural gas, and petrol engines
Cool-Gard™ II Pre-Mix
- Service life of 6 years / 6,000 hours
- Fully formulated for heavy-duty cooling systems
- Reduces downtime and lowers operating costs
- Protects against corrosion and cavitation
- Thermally stable
- Pre-mixed with premium quality water
- Contains bittering agent
- Recommended for heavy- and light-duty diesel, natural gas, and petrol engines
Fuel Solutions
Fuel-Protect Diesel Fuel Conditioner
- Uphold diesel fuel performance and maintain peak engine efficiency year-round.
- Boosts fuel's cetane number for faster, smoother and more fuel-efficient starting
- Detergents clean the fuels system and injectors work to prevent performance-robbing erosion
- Lubricants protect and reduce injector and pump wear
- Maintains fuel pump warranty
- Minimises smoking
- Available in Summer and Winter formulas
Fuel-Protect Keep Clean Solution
- Designed and tested by John Deere engineers.
- Recommended by engineers who design, develop, and test John Deere engines.
- Formulated to perform up to 500 hours in your John Deere engine*.
- Reduces downtime.
- Next generation low ash CK-4 formula.
- Meets performance and emission requirements for all four-stroke diesel engines.
- Supports engines with diesel particulate filters, including 2007 and newer on-highway vehicles.
- Backward compatible for all current applications.
*See dealer for details