D630Draper
- 9.1 m cut width
- Compatible with W200M, W235M, W235R and W260R
- Hydraulic tilt John Deere cutter bar
- Ground speed matching
- Integrated controls
Features
Expand All
Collapse All
D600 Draper and interchangeable rotary platform
D600 Draper on W235 Windrower
Red circles point out the location of the belt drive motors
Motor driving the left-hand belt
Motor driving the right-hand belt
D600 Draper
D600 Draper on windrower
First pass with right discharge
Second pass with right discharge
Third pass with left discharge
Center discharge
Interchangeable with John Deere rotary platforms
D600 Draper and interchangeable rotary platform
D600 Draper has an interchangeable rotary platform:
- Interchangeable on W200M and R Series units in 30 minutes or less
- Growers can use one traction unit for harvesting both small grains and hay
Higher productivity with center-driven belts
Center-driven belts
D600 Draper on W235 Windrower
- Deliver increased torque
- Enable greater productivity with minimal belt slippage
- Increase performance in heavy crop conditions
Red circles point out the location of the belt drive motors
- Draper belts on the D600 are driven from the center of the platform
- Delivers increased belt performance compared to drapers with end-driven belts
Belt drive motors
Motor driving the left-hand belt
Motor driving the right-hand belt
Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.
As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.
Strong, positive-feeding reel handles all crop conditions
D600 Draper
The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.
The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.
D600 Draper teeth
- Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.
- Additional teeth can be added at any location along the extruded tooth bar.
Draper hydraulic pump control logic delivers constant header speed
D600 Draper on windrower
The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.
Hydraulic deck shift (double swath package)
John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).
- Larger windrows to match combine or self-propelled forage harvester
- Match narrower-width drapers with higher-capacity harvesting
- Place higher-density windrows in front of harvesters when yields are low
- Discharge two windrows side by side for uniform combine or forage harvester feeding
First pass with right discharge
Second pass with right discharge
Third pass with left discharge
Center discharge
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere D630 Draper |
Key Specs
| Cutterbar - Type | John Deere double-cut knives: 10.2 cm 4 in. |
|||
|---|---|---|---|---|
| Cut width (length) | 7.6 m 25 ft |
|||
| Reel type | Hydraulic | |||
| Fingers | Plastic | |||
| Belt width | V-guided draper belt: 106.7 cm 42 |
|||
| Platform length | ||||
| Overall operating depth | ||||
| Transport width, field position | ||||
| Transport width on wheel, less dividers | ||||
| Transport length, hitch extended | 9 m 29.6 ft |
|||
| Platform Weight 5 Bat | ||||
| Platform Weight 6 Bat | ||||
| Platform Weight 9 Bat |
Cutterbar
| Type | John Deere double-cut knives: 10.2 cm 4 in. |
|||
|---|---|---|---|---|
| Cut width (length) | 9.1 m 30 ft |
|||
| Knife drive | Standard: Single motor and knife drive Optional: Two hydraulic motors and two knife drives |
|||
| Knife speed | 520 rpm | |||
| Stroke length | 98 mm 3.9 in. |
|||
| Cutterbar tilt | Hydraulic, adjustable from cab | |||
| Guards | ||||
| Hold Downs |
Reel
| Reel type | Hydraulic | |||
|---|---|---|---|---|
| Number of bats | Six | |||
| Fingers | Plastic | |||
| Diameter | 1118 mm 44 in. |
|||
| Height control | Hydraulic, adjustable from cab | |||
| Speed control | Multi-function lever, in cab | |||
| Reel lift | Hydraulic, adjustable from cab | |||
| Reel fore and aft | Hydraulic, adjustable from cab | |||
| Reel resume | ||||
| Reel reverse | ||||
| Operating speeds | ||||
| Operating speeds (54-inch reel) | ||||
| Center tube diameter: all reel sizes | ||||
| Finger Length | ||||
| Finger Spacing (staggered on alternate bats) | ||||
| Finger Tip Radius (adjustment range – factory assembled) | ||||
| Span |
Draper and decks
| Belt width | V-guided draper belt: 106.7 42 in. |
|||
|---|---|---|---|---|
| Delivery opening width | Delivery, double swath opening: 137.2 cm 54 in. Delivery, single swath opening: 203.2 cm 80 in. |
|||
| Delivery opening height | ||||
| Cleat height | ||||
| Draper drive | ||||
| Operating speed | ||||
| Speed control | ||||
| Remote canvas speed control | ||||
| Deck tilt | ||||
| Deck extensions |
Header height sensing
| Type | ||||
|---|---|---|---|---|
| Header height sensing on the ground | ||||
| Header height sensing off the ground |
Auxiliary top auger
| Type | Optional: Factory-installed cross-auger |
|---|
Dimensions
| Platform length | ||||
|---|---|---|---|---|
| Overall operating depth | ||||
| Operating width (field) | 9.1 m 30 ft |
|||
| Transport width (reel fully retracted) | 2.6 m 8.5 ft |
|||
| Transport width, field position | ||||
| Transport width on wheel, less dividers | ||||
| Transport height | 2.44 m 29.6 ft |
|||
| Transport length, hitch extended | 10.5 m 34.6 ft |
Weight
| Approximate weight (base platform without reel) | 1232 kg 3513 lb |
|||
|---|---|---|---|---|
| Approximate weight (base platform with reel) | 2710 kg 5975 lb |
|||
| Approximate weight (with transport) | ||||
| Platform Weight 5 Bat | ||||
| Platform Weight 6 Bat | ||||
| Platform Weight 9 Bat |
Center opening / crop delivery
| Center opening width between belts | ||||
|---|---|---|---|---|
| Back sheet opening | ||||
| Deck shift / double windrow capability (manual / hydraulic / not available) |
Gauge wheels and transportation
| Gauge wheels | Optional: Adjustable castoring gauge wheel | |||
|---|---|---|---|---|
| Integrated slow speed transport system | Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table |
Additional information
| Date collected |
|---|
Knife Sections
| Center Link Extended | ||||
|---|---|---|---|---|
| Center Link Retracted | ||||
| Cutterbar Lift Range (measured at guard tip) (Center link fully retracted) | ||||
| Guard Angle (cutterbar on ground) | ||||
| Knife Sections |
-
160A Auger Platform -
180A Auger Platform -
415D Draper Platform -
420D Draper Platform -
425D Draper Platform -
430D Draper Platform -
435D Draper Platform -
440D Draper Platform -
D625 Draper -
D630 Draper
-
D636 Draper
-
R400 Rotary Platform -
R500 Rotary Platform -
W200M Windrower -
W235M Windrower -
W235R Windrower -
W260R Windrower
Product features are based on published information at the time of publication. Product features are subject to change without notice. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. Contact your local John Deere dealer for more information.