iTEC™ Pro guidance application illustration
- Headland – iTEC Pro
- Turn pattern
- Main field – AutoTrac™ steering system
- Headland boundary
- Field boundary
iTEC Pro stands for Intelligent Total Equipment Control. Compatible with the GreenStar™ 3 or GreenStar 2 system. iTEC Pro is the next step toward complete tractor automation and works with SF1, SF2, or RTK accuracy levels.
This innovative solution coordinates machine and implement functions with end turns by utilizing the GreenStar 3 2630, or GreenStar 2 2600 Display, as well as the StarFire™ 3000 Receiver, or StarFire iTC Receiver. As illustrated in the diagram above, by knowing the location of the machine, the location of the boundaries, and a sequence of functions, iTEC Pro enables operators to automate many in-cab tasks. By automating these functions, the machine and implement functions can perform consistently on headlands or internal boundaries.
When paired with AutoTrac, this system accurately guides the tractor around an optimal end-of-row that is configured based on implement and machine dimensions input into the display.
By automating these tasks, this system also correctly positions the machine and implement for the next field pass to increase accuracy and efficiency. Operating at optimal speeds with correct implement functions happening, when programmed, is all made easy with iTEC Pro.
iTEC Pro helps growers reach a higher level of precision and efficiency.
iTEC Pro also reduces operator fatigue and increases efficiency.
Once they have experienced it, they will not want to turn around without it. There is no better way to start the experience than with an iTEC Pro demonstration.