4045AFM85Marine Propulsion Engine
- 4.5L PowerTech™
- 119-168 kW (160-225 hp)
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere 4045AFM85 Marine Propulsion Engine |
Emissions Certifications
| IMO Tier 2 | ||||
|---|---|---|---|---|
| EPA Tier 3 | ||||
| RCD 2 |
General Data (based on standard option configuration)
| Model | 4045AFM85 | |||
|---|---|---|---|---|
| Number of cylinders | 4 | |||
| Displacement-- L (cu in) | 4.5 (275) | |||
| Bore and Stroke-- mm (in) | 107 x 127 (4.21 x 5.00) | |||
| Engine Type | In-line, 4- Cycle | |||
| Aspiration | Turbocharged and air-to-coolant aftercooled | |||
| Length - mm (in) | 1105 (43.5) | |||
| Width Maximum - mm (in) | 864 (34.0) | |||
| Length to rear face of flywheel housing - mm (in) | 890 (35.0) | |||
| Flywheel housing SAE | 3 | |||
| Height - mm (in) | 964 (38.0) | |||
| Height, crankshaft centerline to top - mm (in) | 654 (25.7) | |||
| Height, crankshaft centerline to bottom - mm (in) | 310 (12.2) | |||
| Weight, dry - kg (lb) | 578 (1274) |
Engine Specifications
| Performance Rating | Power KW (bhp) Rated Speed (rpm) Rated fuel consumption L/hr(gal/hr) |
|||
|---|---|---|---|---|
| M1 | 119 ( 160 ) 2300 33.2 ( 8.8 ) |
|||
| M2 | 134 ( 180 ) 2400 36.9 ( 9.7 ) |
|||
| M3 | 149 ( 200 ) 2500 44.2 ( 11.7 ) |
|||
| M4 | 168 ( 225 ) 2600 48.6 ( 12.8 ) |
M rating
| M1 - Typical annual usage (hr) | Unrestricted | |||
|---|---|---|---|---|
| M1 - Typical full-power operation (hr) | Uninterrupted | |||
| M1 - Typical load factor | >65% | |||
| M2 - Typical annual usage (hr) | 000-5 | |||
| M2 - Typical full-power operation (hr) | 16 of each 24 hr | |||
| M2 - Typical load factor | <=65% | |||
| M3 - Typical annual usage (hr) | 000-4 | |||
| M3 - Typical full-power operation (hr) | 4 of each 12 hr | |||
| M3 - Typical load factor | <=50% | |||
| M4 - Typical annual usage (hr) | 000-3 | |||
| M4 - Typical full-power operation (hr) | 1 of each 12 hr | |||
| M4 - Typical load factor | <=40% |
